Ferrari 348 TB
SOLD
The only European delivered Ferrari 348 TB in white in today’s market | Recently completely serviced, including replacement of belts | Originally delivered in Italy | Including original books
ABOUT
ABOUT
The last Ferrari under Enzo Ferrari
The Ferrari 348 replaced the Ferrari 328 in 1989 and was in production until it was replaced by the Ferrari 355 in 1995. It was the final V8 model developed under the direction of Enzo Ferrari, before his death.
The Ferrari 348, badged 348 TB for the coupe (Transversale Berlinetta) and 348 TS for targa (Transversale Spider), featured a naturally aspirated 3.4-litre version of the quad-cam, four-valve-per-cylinder V8 engine. As with its predecessors, the model number was derived from this configuration, with the first two digits being the displacement of the engine and the third being the number of cylinders. The engine, which had a power output of 300 horsepower, was mounted longitudinally and coupled to a transverse manual gearbox, like the Mondial T with which the 348 shared many components. The “T” in the model name 348 TB and TS refers to the transverse position of the gearbox. Overall, 2.894 examples of the 348 TB and 4.228 of the 348 TS were produced.
The Ferrari 348’s styling differed from previous models with straked side air intakes and rectangular taillights resembling the Testarossa, stylistic themes reminiscent of the F40, the world’s fastest production car at the time, and other prestigious Ferrari models of the past. The model was also the final design overseen by chief stylist Leonardo Fioravanti, known for such designs as the F40, Daytona, 512 Berlinetta Boxer, 288 GTO P5, P6 and others.
Similar to the Ferrari Testarossa but departing from the 512 BB and 308/328, the oil and coolant radiators were relocated from the nose to the sides, widening the side of the car substantially, but making the cabin much easier to cool since hoses routing warm water no longer ran underneath the cabin as in the older front-radiator cars. This also had the side effect of making the doors very wide.
The Ferrari 348 was equipped with a dry-sump oil system to prevent oil starvation at high speeds and during hard cornering. The oil level could only be accurately checked on the dipstick when the engine was running due to this setup. The 348 was fitted with adjustable ride-height suspension and a removable rear sub-frame to speed up the removal of the engine for maintenance.
From 1993, with the introduction of the Ferrari 348 GTB and Ferrari 348 GTS, both the engine cover and lower body skirts were body-coloured instead of black, and the rear track was one inch wider due to the mounting area, on the inside, of the rear wheels being thicker. The suspension geometry was revised which greatly enhanced its handling, ride and body control. The fuel tank was also smaller (88L) in order to reduce overall weight and provide space to improve chassis rigidity.
This unique Ferrari 348
This early Ferrari 348 TB was originally delivered to Ing. Domenico Schiavon from Trento, Italy – through official Ferrari sales agent Ineco Srl in Bolzano on December 22, 1989. The car returned to this dealer for its initial free service on February 5, 1990. In 1994, the car was acquired by the second owner, living in Verona. The car remained in Italy until it was exported to The Netherlands in 2015. Regarding to the original service book, the car was serviced periodically including a major recent service and replacement of the belts. Recent invoices totally 20,000 EUR are present in file.
It’s believed to be one of less than 10 delivered originally in white to European specifications, it’s the only EU delivered 348 (TB/TS/Spider) ever been in The Netherlands.
This Ferrari 348 TB is for sale, please don’t hesitate to contact us for further details.
The Ferrari 348 replaced the Ferrari 328 in 1989 and was in production until it was replaced by the Ferrari 355 in 1995. It was the final V8 model developed under the direction of Enzo Ferrari, before his death.
The Ferrari 348, badged 348 TB for the coupe (Transversale Berlinetta) and 348 TS for targa (Transversale Spider), featured a naturally aspirated 3.4-litre version of the quad-cam, four-valve-per-cylinder V8 engine. As with its predecessors, the model number was derived from this configuration, with the first two digits being the displacement of the engine and the third being the number of cylinders. The engine, which had a power output of 300 horsepower, was mounted longitudinally and coupled to a transverse manual gearbox, like the Mondial T with which the 348 shared many components. The “T” in the model name 348 TB and TS refers to the transverse position of the gearbox. Overall, 2.894 examples of the 348 TB and 4.228 of the 348 TS were produced.
The Ferrari 348’s styling differed from previous models with straked side air intakes and rectangular taillights resembling the Testarossa, stylistic themes reminiscent of the F40, the world’s fastest production car at the time, and other prestigious Ferrari models of the past. The model was also the final design overseen by chief stylist Leonardo Fioravanti, known for such designs as the F40, Daytona, 512 Berlinetta Boxer, 288 GTO P5, P6 and others.
Similar to the Ferrari Testarossa but departing from the 512 BB and 308/328, the oil and coolant radiators were relocated from the nose to the sides, widening the side of the car substantially, but making the cabin much easier to cool since hoses routing warm water no longer ran underneath the cabin as in the older front-radiator cars. This also had the side effect of making the doors very wide.
The Ferrari 348 was equipped with a dry-sump oil system to prevent oil starvation at high speeds and during hard cornering. The oil level could only be accurately checked on the dipstick when the engine was running due to this setup. The 348 was fitted with adjustable ride-height suspension and a removable rear sub-frame to speed up the removal of the engine for maintenance.
From 1993, with the introduction of the Ferrari 348 GTB and Ferrari 348 GTS, both the engine cover and lower body skirts were body-coloured instead of black, and the rear track was one inch wider due to the mounting area, on the inside, of the rear wheels being thicker. The suspension geometry was revised which greatly enhanced its handling, ride and body control. The fuel tank was also smaller (88L) in order to reduce overall weight and provide space to improve chassis rigidity.
This unique Ferrari 348
This early Ferrari 348 TB was originally delivered to Ing. Domenico Schiavon from Trento, Italy – through official Ferrari sales agent Ineco Srl in Bolzano on December 22, 1989. The car returned to this dealer for its initial free service on February 5, 1990. In 1994, the car was acquired by the second owner, living in Verona. The car remained in Italy until it was exported to The Netherlands in 2015. Regarding to the original service book, the car was serviced periodically including a major recent service and replacement of the belts. Recent invoices totally 20,000 EUR are present in file.
It’s believed to be one of less than 10 delivered originally in white to European specifications, it’s the only EU delivered 348 (TB/TS/Spider) ever been in The Netherlands.
This Ferrari 348 TB is for sale, please don’t hesitate to contact us for further details.
DISCOVER
1966 | 39.444 KM
Most desirable model, with 2.8 liter and three carburators | One of only 187 examples produced | Recently mechanically inspected and serviced | Very good driver’s quality
SOLD